The University of Queensland

A review of the use of cryogenic coolant during machining titanium alloys

Sivarupan, Tharmalingam, Bermingham, Michael, Ng, Chi-Ho, Sun, Shoujin and Dargusch, Matthew (2024). A review of the use of cryogenic coolant during machining titanium alloys. Sustainable Materials and Technologies, 40 e00946, e00946. doi: 10.1016/j.susmat.2024.e00946

In-situ investigation of the time-temperature dependent lattice and microstructure of Sn-Bi alloys

Tan, Xin F., Hao, Qichao, Zhou, Jiye, Gu, Qinfen, McDonald, Stuart D., Sweatman, Keith, Ikeda, Masahiko, Yasuda, Kazuhiro, Bermingham, Michael J. and Nogita, Kazuhiro (2024). In-situ investigation of the time-temperature dependent lattice and microstructure of Sn-Bi alloys. Materialia, 33 101974, 1-12. doi: 10.1016/j.mtla.2023.101974

Ultrauniform, strong, and ductile 3D-printed titanium alloy through bifunctional alloy design

Zhang, Jingqi, Bermingham, Michael J., Otte, Joseph, Liu, Yingang, Hou, Ziyong, Yang, Nan, Yin, Yu, Bayat, Mohamad, Lin, Weikang, Huang, Xiaoxu, StJohn, David H. and Dargusch, Matthew S. (2024). Ultrauniform, strong, and ductile 3D-printed titanium alloy through bifunctional alloy design. Science, 383 (6683), 639-645. doi: 10.1126/science.adj0141

Tensile properties and microstructural evolution of 17–4 PH stainless steel fabricated by laser hybrid additive manufacturing technology

Li, Nan, Wang, Qiang, Bermingham, Michael, Niu, Wenjuan, Han, Peng, Guo, Nan and Li, Shenao (2024). Tensile properties and microstructural evolution of 17–4 PH stainless steel fabricated by laser hybrid additive manufacturing technology. International Journal of Plasticity, 173 103885, 103885. doi: 10.1016/j.ijplas.2024.103885

Controlling Pore Position during Transient Liquid Phase Bonding for High-temperature Soldering Processes

Razak, N. R. Abdul, Tan, Xin F., McDonald, Stuart D., Bermingham, Michael J., Venezuela, Jeffrey, Nishimura, Tetsuro and Nogita, Kazuhiro (2024). Controlling Pore Position during Transient Liquid Phase Bonding for High-temperature Soldering Processes. Transactions of The Japan Institute of Electronics Packaging, 17, E23-009. doi: 10.5104/jiepeng.17.e23-009-1

The effects of Sb on the lattice and microstructure characteristics of hypo-eutectic Sn-Bi alloys

Tan, Xin F., Hao, Qichao, Gu, Qinfen, McDonald, Stuart D., Sweatman, Keith, Bermingham, Michael and Nogita, Kazuhiro (2023). The effects of Sb on the lattice and microstructure characteristics of hypo-eutectic Sn-Bi alloys. Materials Characterization, 201 112934, 1-11. doi: 10.1016/j.matchar.2023.112934

Eliminating porosity defects, promoting equiaxed grains and improving the mechanical properties of additively manufactured Ti-22V-4Al with super-transus hot isostatic pressing

Ng, C. H., Bermingham, M. J. and Dargusch, M. S. (2023). Eliminating porosity defects, promoting equiaxed grains and improving the mechanical properties of additively manufactured Ti-22V-4Al with super-transus hot isostatic pressing. Additive Manufacturing, 72 103630, 1-10. doi: 10.1016/j.addma.2023.103630

Towards isotropic behaviour in Ti–6Al–4V fabricated with laser powder bed fusion and super transus hot isostatic pressing

Zhang, Meili, Ng, Chi-Ho, Dehghan-Manshadi, Ali, Hall, Chris, Bermingham, Michael J. and Dargusch, Matthew S. (2023). Towards isotropic behaviour in Ti–6Al–4V fabricated with laser powder bed fusion and super transus hot isostatic pressing. Materials Science and Engineering: A, 874 145094, 1-7. doi: 10.1016/j.msea.2023.145094

Fabrication and properties of biodegradable akermanite-reinforced Fe35Mn alloys for temporary orthopedic implant applications

Zhang, Meili, Yang, Nan, Dehghan-Manshadi, Ali, Venezuela, Jeffrey, Bermingham, Michael J. and Dargusch, Matthew S. (2023). Fabrication and properties of biodegradable akermanite-reinforced Fe35Mn alloys for temporary orthopedic implant applications. ACS Biomaterials Science and Engineering, 9 (3), 1261-1273. doi: 10.1021/acsbiomaterials.2c01228

Fatigue behaviour of L-DED processed Ti-6Al-4V with microstructures refined by trace boron addition

Zhang, Kai, Liu, Ying, Tian, Xinni, Yang, Yi, Zhu, Yuman, Bermingham, Michael and Huang, Aijun (2023). Fatigue behaviour of L-DED processed Ti-6Al-4V with microstructures refined by trace boron addition. International Journal of Fatigue, 168 107454, 107454. doi: 10.1016/j.ijfatigue.2022.107454

Towards uniform and enhanced tensile ductility of additively manufactured Ti−5Al−5Mo−5V−3Cr alloy through designing gradient interlayer deposition time

Zhang, Jingqi, Bermingham, Michael, Otte, Joseph, Liu, Yingang and Dargusch, Matthew (2023). Towards uniform and enhanced tensile ductility of additively manufactured Ti−5Al−5Mo−5V−3Cr alloy through designing gradient interlayer deposition time. Scripta Materialia, 223 115066, 115066. doi: 10.1016/j.scriptamat.2022.115066

Deep learning based modelling of three-dimensional magnetic field

Nguyen, Van Tai, Bollmann, Steffen, Bermingham, Michael, Nguyen, Ha Xuan and Dargusch, Matthew S. (2023). Deep learning based modelling of three-dimensional magnetic field. Progress In Electromagnetics Research B, 100, 173-189. doi: 10.2528/pierb23051402

Effect of Hot Isostatic Pressing and heat treatments on porosity of Wire Arc Additive Manufactured Al 2319

Mclean, N., Bermingham, M.J., Colegrove, P., Sales, A., Soro, N., Ng, C.H. and Dargusch, M.S. (2022). Effect of Hot Isostatic Pressing and heat treatments on porosity of Wire Arc Additive Manufactured Al 2319. Journal of Materials Processing Technology, 310 117769, 1-10. doi: 10.1016/j.jmatprotec.2022.117769

Controlling grain size, morphology and texture in additively manufactured β-titanium alloy with super transus hot isostatic pressing

Ng, C. H., Bermingham, M. J. and Dargusch, M. S. (2022). Controlling grain size, morphology and texture in additively manufactured β-titanium alloy with super transus hot isostatic pressing. Additive Manufacturing, 59 (Part B) 103176, 1-12. doi: 10.1016/j.addma.2022.103176

Efficient modelling of permanent magnet field distribution for deep learning applications

Nguyen, Van Tai, Bollmann, Steffen, Bermingham, Michael and Dargusch, Matthew S. (2022). Efficient modelling of permanent magnet field distribution for deep learning applications. Journal of Magnetism and Magnetic Materials, 559 169521, 1-12. doi: 10.1016/j.jmmm.2022.169521

Controlling the distribution of porosity during transient liquid phase bonding of Sn-based solder joint

Abdul Razak, N. R., Tan, X. F., Mohd Salleh, M. A. A., McDonald, S. D., Bermingham, M. J., Yasuda, H. and Nogita, K. (2022). Controlling the distribution of porosity during transient liquid phase bonding of Sn-based solder joint. Materials Today Communications, 31 103248, 103248. doi: 10.1016/j.mtcomm.2022.103248

Highly ductile hypereutectic Al-Si alloys fabricated by selective laser melting

Yang, Yafeng, Geng, Kang, Li, Shaofu, Bermingham, Michael and Misra, R. D.K. (2022). Highly ductile hypereutectic Al-Si alloys fabricated by selective laser melting. Journal of Materials Science and Technology, 110, 84-95. doi: 10.1016/j.jmst.2021.07.050

Understanding the grain refinement mechanisms in aluminium 2319 alloy produced by wire arc additive manufacturing

Mclean, N., Bermingham, M. J., Colegrove, P., Sales, A. and Dargusch, M. S. (2022). Understanding the grain refinement mechanisms in aluminium 2319 alloy produced by wire arc additive manufacturing. Science and Technology of Welding and Joining, 27 (6), 479-489. doi: 10.1080/13621718.2022.2064704

Systematic investigation of the effect of Ni concentration in Cu-xNi/Sn couples for high temperature soldering

Tan, Xin F., Gu, Qinfen, Bermingham, Michael, McDonald, Stuart D. and Nogita, Kazuhiro (2022). Systematic investigation of the effect of Ni concentration in Cu-xNi/Sn couples for high temperature soldering. Acta Materialia, 226 117661. doi: 10.1016/j.actamat.2022.117661

Towards β-fleck defect free additively manufactured titanium alloys by promoting the columnar to equiaxed transition and grain refinement

Ng, C. H., Bermingham, M. J., Yuan, L. and Dargusch, M. S. (2022). Towards β-fleck defect free additively manufactured titanium alloys by promoting the columnar to equiaxed transition and grain refinement. Acta Materialia, 224 117511, 117511. doi: 10.1016/j.actamat.2021.117511

Heterogeneous lamella design to tune the mechanical behaviour of a new cost- effective compositionally complicated alloy

Yin, Yu, Tan, Qiyang, Sun, Qiang, Ren, Wangrui, Zhang, Jingqi, Liu, Shiyang, Liu, Yingang, Bermingham, Michael, Chen, Houwen and Zhang, Ming-Xing (2022). Heterogeneous lamella design to tune the mechanical behaviour of a new cost- effective compositionally complicated alloy. Journal of Materials Science and Technology, 96, 113-125. doi: 10.1016/j.jmst.2021.03.083

In situ observation of liquid solder alloys and solid substrate reactions using high-voltage transmission electron microscopy

Tan, Xin F., Somidin, Flora, McDonald, Stuart D., Bermingham, Michael J., Maeno, Hiroshi, Matsumura, Syo and Nogita, Kazuhiro (2022). In situ observation of liquid solder alloys and solid substrate reactions using high-voltage transmission electron microscopy. Materials, 15 (2) 510, 510. doi: 10.3390/ma15020510

Laser additive manufacturing of steels

Yin, Yu, Tan, Qiyang, Bermingham, Michael, Mo, Ning, Zhang, Jingqi and Zhang, Ming-Xing (2022). Laser additive manufacturing of steels. International Materials Reviews, 67 (5), 1-87. doi: 10.1080/09506608.2021.1983351

Layup optimisation of laminated composite tubular structures under thermomechanical loading conditions using PSO

Veivers, Harry, Bermingham, Michael, Dunn, Mitchell and Veidt, Martin (2021). Layup optimisation of laminated composite tubular structures under thermomechanical loading conditions using PSO. Composite Structures, 276 114483, 114483. doi: 10.1016/j.compstruct.2021.114483

Data – driven modelling of the interaction force between permanent magnets

Nguyen, Van Tai, Bermingham, Michael and Dargusch, Matthew S. (2021). Data – driven modelling of the interaction force between permanent magnets. Journal of Magnetism and Magnetic Materials, 532 167869, 167869. doi: 10.1016/j.jmmm.2021.167869

High stability and high strength β-titanium alloys for additive manufacturing

Ng, C. H., Bermingham, M. J., Kent, D. and Dargusch, M. S. (2021). High stability and high strength β-titanium alloys for additive manufacturing. Materials Science and Engineering A, 816 141326, 1-7. doi: 10.1016/j.msea.2021.141326

A cost-effective Fe-rich compositionally complicated alloy with superior high-temperature oxidation resistance

Yin, Yu, Tan, Qiyang, Zhao, Yitian, Sun, Qiang, Shi, Zhiming, Bermingham, Michael, Zhuang, Wyman, Huang, Han and Zhang, Ming-Xing (2021). A cost-effective Fe-rich compositionally complicated alloy with superior high-temperature oxidation resistance. Corrosion Science, 180 109190, 109190. doi: 10.1016/j.corsci.2020.109190

Eliminating segregation defects during additive manufacturing of high strength β-titanium alloys

Ng, C. H., Bermingham, M. J. and Dargusch, M. S. (2021). Eliminating segregation defects during additive manufacturing of high strength β-titanium alloys. Additive Manufacturing, 39 101855, 1-12. doi: 10.1016/j.addma.2021.101855

Challenges in laser-assisted milling of titanium alloys

Dargusch, Matthew S., Sivarupan, Tharmalingam, Bermingham, Michael, Rashid, Rizwan Abdul Rahman, Palanisamy, Suresh and Sun, Shoujin (2020). Challenges in laser-assisted milling of titanium alloys. International Journal of Extreme Manufacturing, 3 (1) 015001, 015001. doi: 10.1088/2631-7990/abc26b

Spheroidization behaviour of a Fe-enriched eutectic high-entropy alloy

Yin, Yu, Kent, Damon, Tan, Qiyang, Bermingham, Michael and Zhang, Ming-Xing (2020). Spheroidization behaviour of a Fe-enriched eutectic high-entropy alloy. Journal of Materials Science and Technology, 51, 173-179. doi: 10.1016/j.jmst.2020.01.066

Correction to: Challenges and Opportunities in the Selective Laser Melting of Biodegradable Metals for Load-Bearing Bone Scaffold Applications (Metallurgical and Materials Transactions A, (2020), 51, 7, (3311-3334), 10.1007/s11661-020-05796-z)

Carluccio, D., Demir, A. G., Bermingham, M. J. and Dargusch, M. S. (2020). Correction to: Challenges and Opportunities in the Selective Laser Melting of Biodegradable Metals for Load-Bearing Bone Scaffold Applications (Metallurgical and Materials Transactions A, (2020), 51, 7, (3311-3334), 10.1007/s11661-020-05796-z). Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 51 (8), 4327-4328. doi: 10.1007/s11661-020-05829-7

High strength heat-treatable β-titanium alloy for additive manufacturing

Bermingham, M. J., Kent, D., Pace, B., Cairney, J. M. and Dargusch, M. S. (2020). High strength heat-treatable β-titanium alloy for additive manufacturing. Materials Science and Engineering A, 791 139646, 139646. doi: 10.1016/j.msea.2020.139646

Eutectic modification of Fe-enriched high-entropy alloys through minor addition of boron

Yin, Yu, Tan, Qiyang, Wang, Tong, Kent, Damon, Mo, Ning, Bermingham, Michael, Li, Huijun and Zhang, Ming-Xing (2020). Eutectic modification of Fe-enriched high-entropy alloys through minor addition of boron. Journal of Materials Science, 55 (29), 14571-14587. doi: 10.1007/s10853-020-05025-3

Challenges and opportunities in the selective laser melting of biodegradable metals for load-bearing bone scaffold applications

Carluccio, D., Demir, A. G., Bermingham, M. J. and Dargusch, M. S. (2020). Challenges and opportunities in the selective laser melting of biodegradable metals for load-bearing bone scaffold applications. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 51 (7), 3311-3334. doi: 10.1007/s11661-020-05796-z

High-temperature age-hardening of a novel cost-effective Fe45Ni25Cr25Mo5 high entropy alloy

Yin, Yu, Chen, Zhihan, Mo, Ning, Kent, Damon, Candella, Adhitya Riadhi, Koey, Kai En, Tan, Qiyang, Bermingham, Michael and Zhang, Ming-Xing (2020). High-temperature age-hardening of a novel cost-effective Fe45Ni25Cr25Mo5 high entropy alloy. Materials Science and Engineering A, 788 139580, 139580. doi: 10.1016/j.msea.2020.139580

Sintering and biocompatibility of blended elemental Ti-xNb alloys

Chen, Yunhui, Han, Pingping, Dehghan-Manshadi, Ali, Kent, Damon, Ehtemam-Haghighi, Shima, Jowers, Casey, Bermingham, Michael, Li, Tong, Cooper-White, Justin and Dargusch, Matthew S. (2020). Sintering and biocompatibility of blended elemental Ti-xNb alloys. Journal of the Mechanical Behavior of Biomedical Materials, 104 103691, 103691. doi: 10.1016/j.jmbbm.2020.103691

Roles of Nd and Mn in a new creep-resistant magnesium alloy

Mo, Ning, McCarroll, Ingrid, Tan, Qiyang, Ceguerra, Anna, Cairney, Julie, Dieringa, Hajo, Huang, Yuanding, Jiang, Bin, Pan, Fusheng, Bermingham, Michael and Zhang, Ming-Xing (2020). Roles of Nd and Mn in a new creep-resistant magnesium alloy. Materials Science and Engineering A, 779 139152, 139152. doi: 10.1016/j.msea.2020.139152

Titanium sponge as a source of native nuclei in titanium alloys

Tedman-Jones, S.N., Bermingham, M.J., McDonald, S.D., StJohn, D.H. and Dargusch, M.S. (2020). Titanium sponge as a source of native nuclei in titanium alloys. Journal of Alloys and Compounds, 818 153353, 153353. doi: 10.1016/j.jallcom.2019.153353

A novel method to 3D-print fine-grained AlSi10Mg alloy with isotropic properties via inoculation with LaB6 nanoparticles

Tan, Qiyang, Zhang, Jingqi, Mo, Ning, Fan, Zhiqi, Yin, Yu, Bermingham, Michael, Liu, Yingang, Huang, Han and Zhang, Ming-Xing (2020). A novel method to 3D-print fine-grained AlSi10Mg alloy with isotropic properties via inoculation with LaB6 nanoparticles. Additive Manufacturing, 32 101034. doi: 10.1016/j.addma.2019.101034

Improved biodegradable magnesium alloys through advanced solidification processing

Dargusch, M.S., Balasubramani, N., Venezuela, J., Johnston, S., Wang, G., Lau, C., Bermingham, M., Kent, D. and StJohn, D.H. (2020). Improved biodegradable magnesium alloys through advanced solidification processing. Scripta Materialia, 177, 234-240. doi: 10.1016/j.scriptamat.2019.10.028

Additively manufactured iron-manganese for biodegradable porous load-bearing bone scaffold applications

Carluccio, Danilo, Xu, Chun, Venezuela, Jeffrey, Cao, Yuxue, Kent, Damon, Bermingham, Michael, Demir, Ali Gökhan, Previtali, Barbara, Ye, Qingsong and Dargusch, Matthew (2020). Additively manufactured iron-manganese for biodegradable porous load-bearing bone scaffold applications. Acta Biomaterialia, 103, 346-360. doi: 10.1016/j.actbio.2019.12.018

Grain structure control during metal 3D printing by high-intensity ultrasound

Todaro, C. J., Easton, M. A., Qiu, D., Zhang, D., Bermingham, M. J., Lui, E. W., Brandt, M., StJohn, D. H. and Qian, M. (2020). Grain structure control during metal 3D printing by high-intensity ultrasound. Nature Communications, 11 (1) 142, 142. doi: 10.1038/s41467-019-13874-z

Grain refinement of alloys in fusion-based additive manufacturing processes

Zhang, Duyao, Prasad, Arvind, Bermingham, Michael J., Todaro, Carmelo J., Benoit, Michael J., Patel, Mitesh N., Qiu, Dong, StJohn, David H., Qian, Ma and Easton, Mark A. (2020). Grain refinement of alloys in fusion-based additive manufacturing processes. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 51 (9), 4341-4359. doi: 10.1007/s11661-020-05880-4

Selective laser melting Fe and Fe-35Mn for biodegradable implants

Carluccio, Danilo, Bermingham, Michael, Dargusch, M. S., Demir, Ali Gökhan, Caprio, Leonardo and Previtali, Barbara (2020). Selective laser melting Fe and Fe-35Mn for biodegradable implants. International Journal of Modern Physics B, 34 (1-3) 2040034. doi: 10.1142/S0217979220400342

Effects of boron addition on microstructures and mechanical properties of Ti-6Al-4V manufactured by direct laser deposition

Zhang, K., Tian, X., Bermingham, M., Rao, J., Jia, Q., Zhu, Y., Wu, X., Cao, S. and Huang, A. (2019). Effects of boron addition on microstructures and mechanical properties of Ti-6Al-4V manufactured by direct laser deposition. Materials and Design, 184 108191, 108191. doi: 10.1016/j.matdes.2019.108191

Understanding solid solution strengthening at elevated temperatures in a creep-resistant Mg-Gd-Ca alloy

Mo, Ning, McCarroll, Ingrid, Tan, Qiyang, Ceguerra, Anna, Liu, Ying, Cairney, Julie, Dieringa, Hajo, Huang, Yuanding, Jiang, Bin, Pan, Fusheng, Bermingham, Michael and Zhang, Ming-Xing (2019). Understanding solid solution strengthening at elevated temperatures in a creep-resistant Mg-Gd-Ca alloy. Acta Materialia, 181, 185-199. doi: 10.1016/j.actamat.2019.09.058

Comparison of the microstructure and biocorrosion properties of additively manufactured and conventionally fabricated near β Ti–25Nb–3Zr–3Mo–2Sn alloy

Dargusch, Matthew S., Wang, Gui, Kent, Damon, Bermingham, Michael, Venezuela, Jeffrey, Frith, Jessica E., Yu, Zhentao, Yu, Sen and Shi, Zhiming (2019). Comparison of the microstructure and biocorrosion properties of additively manufactured and conventionally fabricated near β Ti–25Nb–3Zr–3Mo–2Sn alloy. ACS Biomaterials Science and Engineering, 5 (11) acsbiomaterials.9b00596, 5844-5856. doi: 10.1021/acsbiomaterials.9b00596

A new approach to nuclei identification and grain refinement in titanium alloys

Tedman-Jones, S. N., McDonald, S. D., Bermingham, M. J., StJohn, D. H. and Dargusch, M. S. (2019). A new approach to nuclei identification and grain refinement in titanium alloys. Journal of Alloys and Compounds, 794, 268-284. doi: 10.1016/j.jallcom.2019.04.224

Evaluation of the mechanical and wear properties of titanium produced by three different additive manufacturing methods for biomedical application

Attar, H., Bermingham, M. J., Ehtemam-Haghighi, S., Dehghan-Manshadi, A., Kent, D. and Dargusch, M. S. (2019). Evaluation of the mechanical and wear properties of titanium produced by three different additive manufacturing methods for biomedical application. Materials Science and Engineering: A, 760, 339-345. doi: 10.1016/j.msea.2019.06.024

Comparative study of pure iron manufactured by selective laser melting, laser metal deposition, and casting processes

Carluccio, Danilo, Bermingham, Michael, Kent, Damon, Demir, Ali Gökhan, Previtali, Barbara and Dargusch, Matthew S. (2019). Comparative study of pure iron manufactured by selective laser melting, laser metal deposition, and casting processes. Advanced Engineering Materials, 21 (7) adem.201900049, 1900049. doi: 10.1002/adem.201900049

Promoting the columnar to equiaxed transition and grain refinement of titanium alloys during additive manufacturing

Bermingham, M. J., StJohn, D. H., Krynen, J., Tedman-Jones, S. and Dargusch, M. S. (2019). Promoting the columnar to equiaxed transition and grain refinement of titanium alloys during additive manufacturing. Acta Materialia, 168, 261-274. doi: 10.1016/j.actamat.2019.02.020

The influence of laser processing parameters on the densification and surface morphology of pure Fe and Fe-35Mn scaffolds produced by selective laser melting

Carluccio, D., Demir, A. G., Caprio, L., Previtali, B., Bermingham, M. J. and Dargusch, M. S. (2019). The influence of laser processing parameters on the densification and surface morphology of pure Fe and Fe-35Mn scaffolds produced by selective laser melting. Journal of Manufacturing Processes, 40, 113-121. doi: 10.1016/j.jmapro.2019.03.018

Investigating the morphological effects of solute on the β-phase in as-cast titanium alloys

Tedman-Jones, S.N., McDonald, S.D., Bermingham, M.J., St John, D.H. and Dargusch, M.S. (2019). Investigating the morphological effects of solute on the β-phase in as-cast titanium alloys. Journal of Alloys and Compounds, 778, 204-214. doi: 10.1016/j.jallcom.2018.11.063

Biocompatible porous titanium scaffolds produced using a novel space holder technique

Chen, Yunhui, Frith, Jessica Ellen, Dehghan-Manshadi, Ali, Kent, Damon, Bermingham, Michael and Dargusch, Matthew (2018). Biocompatible porous titanium scaffolds produced using a novel space holder technique. Journal of Biomedical Materials Research. Part B, Applied Biomaterials, 106 (8), 2796-2806. doi: 10.1002/jbm.b.34060

Novel cost-effective Fe-based high entropy alloys with balanced strength and ductility

Yin, Yu, Zhang, Jingqi, Tan, Qiyang, Zhuang, Wyman, Mo, Ning, Bermingham, Michael and Zhang, Ming-Xing (2018). Novel cost-effective Fe-based high entropy alloys with balanced strength and ductility. Materials & Design, 162, 24-33. doi: 10.1016/j.matdes.2018.11.033

Current development of creep-resistant magnesium cast alloys: a review

Mo, Ning, Tan, Qiyang, Bermingham, Michael, Huang, Yuanding, Dieringa, Hajo, Hort, Norbert and Zhang, Ming-Xing (2018). Current development of creep-resistant magnesium cast alloys: a review. Materials and Design, 155, 422-442. doi: 10.1016/j.matdes.2018.06.032

Grain refinement of laser remelted Al-7Si and 6061 aluminium alloys with Tibor® and scandium additions

Carluccio, D., Bermingham, M. J., Zhang, Y., StJohn, D. H., Yang, K., Rometsch, P. A., Wu, X. and Dargusch, M. S. (2018). Grain refinement of laser remelted Al-7Si and 6061 aluminium alloys with Tibor® and scandium additions. Journal of Manufacturing Processes, 35, 715-720. doi: 10.1016/j.jmapro.2018.08.030

Metallurgical features of direct laser-deposited Ti6Al4V with trace boron

Rahman Rashid, R. A., Palanisamy, S., Attar, H., Bermingham, M. and Dargusch, M. S. (2018). Metallurgical features of direct laser-deposited Ti6Al4V with trace boron. Journal of Manufacturing Processes, 35, 651-656. doi: 10.1016/j.jmapro.2018.09.018

Insights into machining of a β titanium biomedical alloy from chip microstructures

Kent, Damon, Rahman Rashid, Rizwan, Bermingham, Michael, Attar, Hooyar, Sun, Shoujin and Dargusch, Matthew (2018). Insights into machining of a β titanium biomedical alloy from chip microstructures. Metals, 8 (9) 710, 710. doi: 10.3390/met8090710

Porous titanium scaffolds fabricated by metal injection moulding for biomedical applications

Dehghan-Manshadi, Ali, Chen, Yunhui, Shi, Zhiming, Bermingham, Michael, StJohn, David, Dargusch, Matthew and Qian, Ma (2018). Porous titanium scaffolds fabricated by metal injection moulding for biomedical applications. Materials, 11 (9) 1573, 1573. doi: 10.3390/ma11091573

Trace carbon addition to refine microstructure and enhance properties of additive-manufactured Ti-6Al-4V

Mereddy, S., Bermingham, M. J., Kent, D., Dehghan-Manshadi, A., Stjohn, D. H. and Dargusch, M. S. (2018). Trace carbon addition to refine microstructure and enhance properties of additive-manufactured Ti-6Al-4V. JOM, 70 (9), 1670-1676. doi: 10.1007/s11837-018-2994-x

Sensitivity of Ti-6Al-4V components to oxidation during out of chamber Wire + Arc Additive Manufacturing

Bermingham, M. J., Thomson-Larkins, J., St John, D. H. and Dargusch, M. S. (2018). Sensitivity of Ti-6Al-4V components to oxidation during out of chamber Wire + Arc Additive Manufacturing. Journal of Materials Processing Technology, 258, 29-37. doi: 10.1016/j.jmatprotec.2018.03.014

Optimising the mechanical properties of Ti-6Al-4V components produced by wire + arc additive manufacturing with post-process heat treatments

Bermingham, M. J., Nicastro, L., Kent, D., Chen, Y. and Dargusch, M. S. (2018). Optimising the mechanical properties of Ti-6Al-4V components produced by wire + arc additive manufacturing with post-process heat treatments. Journal of Alloys and Compounds, 753, 247-255. doi: 10.1016/j.jallcom.2018.04.158

Effect of trace lanthanum hexaboride and boron additions on microstructure, tensile properties and anisotropy of Ti-6Al-4V produced by additive manufacturing

Bermingham, M. J., McDonald, S. D. and Dargusch, M. S. (2018). Effect of trace lanthanum hexaboride and boron additions on microstructure, tensile properties and anisotropy of Ti-6Al-4V produced by additive manufacturing. Materials Science and Engineering A, 719, 1-11. doi: 10.1016/j.msea.2018.02.012

Metal injection moulding of titanium and titanium alloys: challenges and recent development

Dehghan-Manshadi, A., Bermingham, M. J., Dargusch, M. S., StJohn, D. H. and Qian, M. (2017). Metal injection moulding of titanium and titanium alloys: challenges and recent development. Powder Technology, 319, 289-301. doi: 10.1016/j.powtec.2017.06.053

Mechanical properties and biocompatibility of porous titanium scaffolds for bone tissue engineering

Chen, Yunhui, Frith, Jessica Ellen, Dehghan-Manshadi, Ali, Attar, Hooyar, Kent, Damon, Soro, Nicolas Dominique Mathieu, Bermingham, Michael J. and Dargusch, Matthew S. (2017). Mechanical properties and biocompatibility of porous titanium scaffolds for bone tissue engineering. Journal of the Mechanical Behavior of Biomedical Materials, 75, 169-174. doi: 10.1016/j.jmbbm.2017.07.015

Manufacturing of graded titanium scaffolds using a novel space holder technique

Chen, Yunhui , Kent, Damon , Bermingham, Michael , Dehghan-Manshadi, Ali , Wang, Gui , Wen, Cuie and Dargusch, Matthew (2017). Manufacturing of graded titanium scaffolds using a novel space holder technique. Bioactive Materials, 2 (4), 248-252. doi: 10.1016/j.bioactmat.2017.07.001

Manufacturing of biocompatible porous titanium scaffolds using a novel spherical sugar pellet space holder

Chen, Yunhui, Kent, Damon, Bermingham, Michael, Dehghan-Manshadi, Ali and Dargusch, Matthew (2017). Manufacturing of biocompatible porous titanium scaffolds using a novel spherical sugar pellet space holder. Materials Letters, 195, 92-95. doi: 10.1016/j.matlet.2017.02.092

Grain refinement of wire arc additively manufactured titanium by the addition of silicon

Mereddy, S., Bermingham, M. J., StJohn, D. H. and Dargusch, M. S. (2017). Grain refinement of wire arc additively manufactured titanium by the addition of silicon. Journal of Alloys and Compounds, 695, 2097-2103. doi: 10.1016/j.jallcom.2016.11.049

Cutting force, chip formation, and tool wear during the laser-assisted machining a near-alpha titanium alloy BTi-6431S

Gao, Yanfeng, Wang, Gui, Bermingham, Michael J. and Dargusch, Matthew S. (2015). Cutting force, chip formation, and tool wear during the laser-assisted machining a near-alpha titanium alloy BTi-6431S. International Journal of Advanced Manufacturing Technology, 79 (9-12), 1949-1960. doi: 10.1007/s00170-015-6917-5

Controlling the microstructure and properties of wire arc additive manufactured Ti–6Al–4V with trace boron additions

Bermingham, M. J., Kent, D., Zhan, H., StJohn, D. H. and Dargusch, M. S. (2015). Controlling the microstructure and properties of wire arc additive manufactured Ti–6Al–4V with trace boron additions. Acta Materialia, 91, 289-303. doi: 10.1016/j.actamat.2015.03.035

A new understanding of the wear processes during laser assisted milling 17-4 precipitation hardened stainless steel

Bermingham, M. J., Kent, D. and Dargusch, M. S. (2015). A new understanding of the wear processes during laser assisted milling 17-4 precipitation hardened stainless steel. Wear, 328-329, 518-530. doi: 10.1016/j.wear.2015.03.025

Tool life and wear mechanisms in laser assisted milling Ti-6Al-4V

Bermingham, M. J., Sim, W. M., Kent, D., Gardiner, S. and Dargusch, M. S. (2015). Tool life and wear mechanisms in laser assisted milling Ti-6Al-4V. Wear, 322-323, 151-163. doi: 10.1016/j.wear.2014.11.001

Laser-assisted milling strategies with different cutting tool paths

Bermingham, M.J., Schaffarzyk, P., Palanisamy, S. and Dargusch, M. S. (2014). Laser-assisted milling strategies with different cutting tool paths. The International Journal of Advanced Manufacturing Technology, 74 (9-12), 1487-1494. doi: 10.1007/s00170-014-6093-z

SPH/FE modeling of cutting force and chip formation during thermally assisted machining of Ti6Al4V alloy

Xi, Yao, Bermingham, Michael, Wang, Gui and Dargusch, Matthew (2014). SPH/FE modeling of cutting force and chip formation during thermally assisted machining of Ti6Al4V alloy. Computational Materials Science, 84, 188-197. doi: 10.1016/j.commatsci.2013.12.018

Advantages of milling and drilling Ti-6Al-4V components with high-pressure coolant

Bermingham, M. J., Palanisamy, S., Morr, D., Andrews, R. and Dargusch, M. S. (2014). Advantages of milling and drilling Ti-6Al-4V components with high-pressure coolant. International Journal of Advanced Manufacturing Technology, 72 (1-4), 77-88. doi: 10.1007/s00170-014-5666-1

Finite element modeling of cutting force and chip formation during thermally assisted machining of Ti6Al4V alloy

Xi, Yao, Bermingham, Michael, Wang, Gui and Dargusch, Matthew (2013). Finite element modeling of cutting force and chip formation during thermally assisted machining of Ti6Al4V alloy. Journal of Manufacturing Science and Engineering, 135 (6) 061014, 061014-1-061014-9. doi: 10.1115/1.4025740

The effect of cutting speed and heat treatment on the fatigue life of Grade 5 and Grade 23 Ti-6Al-4V alloys

Niu, W., Bermingham, M. J., Baburamani, P. S., Palanisamy, S., Dargusch, M. S., Turk, S., Grigson, B. and Sharp, P. K. (2013). The effect of cutting speed and heat treatment on the fatigue life of Grade 5 and Grade 23 Ti-6Al-4V alloys. Materials & Design, 46, 640-644. doi: 10.1016/j.matdes.2012.10.056

The response of the high strength Ti-10V-2Fe-3Al beta titanium alloy to laser assisted cutting

Rashid, R. A. Rahman, Bermingham, M. J., Sun, S., Wang, G. and Dargusch, M. S. (2013). The response of the high strength Ti-10V-2Fe-3Al beta titanium alloy to laser assisted cutting. Precision Engineering-Journal of the International Societies for Precision Engineering and Nanotechnology, 37 (2), 461-472. doi: 10.1016/j.precisioneng.2012.12.002

Understanding the tool wear mechanism during thermally assisted machining Ti-6Al-4V

Bermingham, M. J., Palanisamy, S. and Dargusch, M. S. (2012). Understanding the tool wear mechanism during thermally assisted machining Ti-6Al-4V. International Journal of Machine Tools & Manufacture, 62, 76-87. doi: 10.1016/j.ijmachtools.2012.07.001

A comparison of cryogenic and high pressure emulsion cooling technologies on tool life and chip morphology in Ti-6Al-4V cutting

Bermingham, M. J., Palanisamy, S., Kent, D. and Dargusch, M. S. (2012). A comparison of cryogenic and high pressure emulsion cooling technologies on tool life and chip morphology in Ti-6Al-4V cutting. Journal of Materials Processing Technology, 212 (4), 752-765. doi: 10.1016/j.jmatprotec.2011.10.027

Processing considerations for cast Ti–25Nb–3Mo–3Zr–2Sn biomedical alloys

Bermingham, M. J., McDonald, S. D., Buddery, A. J., StJohn, D. H. and Dargusch, M. S. (2011). Processing considerations for cast Ti–25Nb–3Mo–3Zr–2Sn biomedical alloys. Materials Science and Engineering C: Materials for Biological Applications, 31 (7), 1520-1525. doi: 10.1016/j.msec.2011.06.011

New observations on tool life, cutting forces and chip morphology in cryogenic machining Ti-6Al-4V

Bermingham, M. J., Kirsch, J., Sun, S., Palanisamy, S. and Dargusch, M. S. (2011). New observations on tool life, cutting forces and chip morphology in cryogenic machining Ti-6Al-4V. International Journal of Machine Tools and Manufacture, 51 (6), 500-511. doi: 10.1016/j.ijmachtools.2011.02.009

The effect of boron on the refinement of microstructure in cast cobalt alloys

Bermingham, Michael J., McDonald, Stuart D., StJohn, David H. and Dargusch, Matthew S. (2011). The effect of boron on the refinement of microstructure in cast cobalt alloys. Journal of Materials Research, 26 (7), 951-956. doi: 10.1557/jmr.2011.21

Effects of boron on microstructure in cast zirconium alloys

Dargusch, M. S., Bermingham, M. J., McDonald, S. D. and St John, D. H. (2010). Effects of boron on microstructure in cast zirconium alloys. Journal of Materials Research, 25 (9), 1695-1700. doi: 10.1557/JMR.2010.0233

Titanium as an endogenous grain-refining nucleus

Bermingham, M. J., McDonald, S. D., St John, D. H. and Dargusch, M. S. (2010). Titanium as an endogenous grain-refining nucleus. Philosophical Magazine, 90 (6), 699-715. doi: 10.1080/14786430903236057

Latest developments in understanding grain refinement of cast titanium

Bermingham, Michael, McDonald, Stuart, Dargusch, Matthew and St John, David (2009). Latest developments in understanding grain refinement of cast titanium. Light Metals Age, 67 (4), 47-49.

Beryllium as a grain refiner in titanium alloys

Bermingham, M. J., McDonald, S. D., StJohn D. H. and Dargusch, M. S. (2009). Beryllium as a grain refiner in titanium alloys. Journal of Alloys and Compounds, 481 (1-2), L20-L23. doi: 10.1016/j.jallcom.2009.03.016

Segregation and grain refinement in cast titanium alloys

Bermingham, M. J., McDonald, S. D., StJohn, D. H. and Dargusch, M. S. (2009). Segregation and grain refinement in cast titanium alloys. Journal of Materials Research, 24 (4), 1529-1535. doi: 10.1557/JMR.2009.0173

Effects of boron on microstructure in cast titanium alloys

Bermingham, M., McDonald, S.D., Nogita, K., St John, D.H. and Dargusch, M.S. (2008). Effects of boron on microstructure in cast titanium alloys. Scripta Materialia, 59 (5), 538-541. doi: 10.1016/j.scriptamat.2008.05.002

The mechanism of grain refinement of titanium by silicon

Bermingham, M., McDonald, S.D., Dargusch, M.S. and St John, D.H. (2008). The mechanism of grain refinement of titanium by silicon. Scripta Materialia, 58 (12), 1050-1053. doi: 10.1016/j.scriptamat.2008.01.041

Grain-refinement mechanisms in titanium alloys

Bermingham, M., McDonald, S.D., Dargusch, M.S. and St John, D.H. (2008). Grain-refinement mechanisms in titanium alloys. Journal of Materials Research, 23 (1), 97-104. doi: 10.1557/JMR.2008.0002

Microstructure of cast titanium alloys

Bermingham, M., McDonald, S.D., Dargusch, M.S. and St John, D.H. (2007). Microstructure of cast titanium alloys. Materials Forum, 31, 84-89.

Layup Optimisation and Response of Lightweight Composite Tubular Structures under Thermomechanical Loading Conditions using Particle Swarm Optimisation

Veivers, Harry, Bermingham, Michael, Dunn, Mitch and Veidt, Martin (2024). Layup Optimisation and Response of Lightweight Composite Tubular Structures under Thermomechanical Loading Conditions using Particle Swarm Optimisation. Engineers Australia.

Controlling porosity during transient liquid phase bonding for high-temperature soldering processes

Abdul Razak, Nurul R., Tan, Xin F., McDonald, Stuart D., Bermingham, Michael J., Venezuela, Jeffery, Nishimura, Tetsuro and Nogita, Kazuhiro (2023). Controlling porosity during transient liquid phase bonding for high-temperature soldering processes. 2023 International Conference on Electronics Packaging (ICEP), Kumamoto, Japan, 19-22 April 2023. Piscataway, NJ, United States: IEEE. doi: 10.23919/icep58572.2023.10129722

Revealing the mechanisms of grain nucleation and formation during additive manufacturing

Bermingham, Michael, StJohn, David, Easton, Mark, Yuan, Lang and Dargusch, Matthew (2020). Revealing the mechanisms of grain nucleation and formation during additive manufacturing. 2nd Asia-Pacific International Conference on Additive Manufacturing (APICAM 2019), Melbourne, VIC Australia, 1 - 3 July 2019. New York, NY, United States: Springer. doi: 10.1007/s11837-020-04019-5

The challenges associated with the formation of equiaxed grains during additive manufacturing of titanium alloys

StJohn, David H., McDonald, Stuart D., Bermingham, Michael J., Mereddy, Sri, Prasad, Arvind and Dargusch, Matthew (2018). The challenges associated with the formation of equiaxed grains during additive manufacturing of titanium alloys. 4th International Conference on Powder Metallurgy of Titanium, PMTi 2017, Xian, China, 8-10 September 2017. Trans Tech Publications Ltd. doi: 10.4028/www.scientific.net/KEM.770.155

A brief history of the grain refinement of cast light alloys

StJohn, David H., Easton, Mark A., Cao, Peng, Bermingham, Michael and Qian, Ma (2013). A brief history of the grain refinement of cast light alloys. LMT 2013: 6th International Light Metals Technology Conference, Old Windsor, UK, 24-26 July, 2013. Stafa-Zurich, Switzerland: Trans Tech Publications. doi: 10.4028/www.scientific.net/MSF.765

FEA modelling of cutting force and chip formation in thermally assisted machining of Ti6Al4V alloy

Xi, Yao, Bermingham, Michael, Wang, Gui and Dargusch, Matthew (2013). FEA modelling of cutting force and chip formation in thermally assisted machining of Ti6Al4V alloy. LMT 2013: 6th International Light Metals Technology Conference, Old Windsor, UK, 24-26 July, 2013. Stafa-Zurich, Switzerland: Trans Tech Publications. doi: 10.4028/www.scientific.net/MSF.765.343

Review of recent titanium research in Australia

Palanisamy, S., Dargusch, M. S., Sun, S., Bermingham, M. J., Wen, C. E., Wang, G., Xia, K. and StJohn, D. H. (2012). Review of recent titanium research in Australia. 12th World Conference on Titanium, Ti 2011, Beijing, China, 19-24 June 2011. Beijing, China: Science Press.

Introduction to the interdependence theory of grain formation and its application to aluminium, magnesium and titanium alloys

StJohn, David H., Easton, Mark A., Qian, Ma, Cao, Peng and Bermingham, Michael J. (2011). Introduction to the interdependence theory of grain formation and its application to aluminium, magnesium and titanium alloys. 5th International Conference on Light Metals Technology, Luneburg, Germany, 19-22 July 2011. Stafa-Zurich, Switzerland: Trans Tech Publications. doi: 10.4028/www.scientific.net/MSF.690.206

Effect of oxygen on the beta-grain size of cast titanium

Bermingham, Michael J., McDonald, Stuart D., Dargusch, Matthew S. and StJohn, David H. (2010). Effect of oxygen on the beta-grain size of cast titanium. 7th Pacific Rim International Conference on Advanced Materials and Processing, PRICM-7, Cairns, QLD, Australia, 2-6 August 2010. Zurich, Switzerland: Trans Tech Publications. doi: 10.4028/www.scientific.net/MSF.654-656.1472

Latest developments in understanding the grain refinement of cast titanium

Bermingham, Michael, McDonald, Stuart D., St John, David H. and Dargusch, Matthew S. (2009). Latest developments in understanding the grain refinement of cast titanium. 4th International Light Metals Technology Conference (LMT 2009), Gold Coast, Australia, 29 June - 1 July 2009. Stafa-Zurich, Switzerland: Trans Tech Publications. doi: 10.4028/www.scientific.net/MSF.618-619.315

Grain Refinement of Cast Titanium Alloys

Michael Bermingham (2009). Grain Refinement of Cast Titanium Alloys. PhD Thesis, School of Mechanical and Mining Engineering, The University of Queensland.

The effect of modification on the corrosion of hypoeutectic Al-Si-Cu and Al-Si-Mg alloys

Bermingham, Michael (2005). The effect of modification on the corrosion of hypoeutectic Al-Si-Cu and Al-Si-Mg alloys. B.Sc Thesis, School of Engineering, The University of Queensland. doi: 10.14264/299109